Aquatec CDP-8800 Booster Pump (Model 8852-2J03-B423). Three chamber diaphragm pump, self priming, and capable of being run dry. The pump delivers 1.4 LPM at 80 psi ( 2.6 LPM in the fully open position) and comes standard with 3/8" John Guest inlet/outlet fittings. This pump operates on 24 VAC and requires a 110v/24VAC 60 Hz transformer and 24 VAC pressure switch for pump operation.
Aquatec CDP-8800 Booster Pump (CDP-8852-2J03-B423)
Aquatec CDP-8800 Booster Pump (Model 8852-2J03-B423). Three chamber diaphragm pump, self priming, and capable of being run dry. Excellent pump for boosting supply water pressure to your RO system. The pump is a must have when low supply water pressure (<40 psi) exists. The pump delivers 1.4 LPM at 80 psi ( 2.6 LPM in the fully open position) and comes standard with 3/8" John Guest inlet/outlet fittings.
This pump operates on 24VAC and requires a 110 VAC/24 VAC 60 Hz transformer and 24 VAC pressure switch for pump operation.SPECIFICATIONS:
- MOTOR: TYPE: 24 VAC, Permanent Magnet, Totally Enclosed, Non-Ventilated
- LEADS: 20 AWG, 6” LONG
- Universal Base
- TEMP. LIMITS: This Motor is Not Equipped with Thermal Protection. For User Safety, Optimal Performance, and Maximum Motor Life, The Motor Surface Temperature Should Not Exceed 150°F (66°C).
- PUMP DESIGN: 3 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry
- TYPICAL APPLICATION: Pre-Filter Water Treatment (R.O. Boost)
- MATERIALS: HOUSINGS: Nylon VALVES: EPDM DIAPHRAGM: Santoprene FASTENERS: Stainless Steel
- LIQUID TEMPERATURE: 170°F (77°C) Max.
- PUMP CERTIFICATIONS: NSF Standard 58
- PRIMING CAPABILITIES: 4' (8850), 5' (8851), 6' (8852)
- Bypass pressure 110 psi
- pump Output - 1.4 LPM@80 psi, 1.6 LPM @60 psi, 2.6 LPM @0 psi
- The pump can be mounted in any orientation.
- Installation instructions are provided.
